繁体中文
ENGLISH
简体中文

◆ About   ◆Products  ◆service  ◆Consultation   ◆Contact

 
Products Series
◆Lightning
Satellite early discharge lightning rod
Apollo active lightning
IF3 pre-discharge lightning rod
INDELEC early discharge lightning rod
INGESCO early discharge lightning rod
◆Surge Protective Device
Germany OBO lightning protection devices
Germany DEHN SPD
British FURSE SPD
U.S. PANAMAX Surge Protector
U.S. Eaton Innovative Surge Protection Device
◆Grounding Products
ETC earthing module
Resistance Reducing Agent
Electrolytic Ion Ground Pole
◆MTL Industrial Products

mtl Surge Protector
 
 

PTX048/PTE048

 

PTX048-3Y201/PTE048-3Y201

PTX048/PTE048

PTX048-3Y201-D/SD

PTE048-3Y201-D/SD

 
 

 

Summary of technical parameters
Pass the peak flow capacity: Each phase 48KA, each model 24KA ANSI / IEEE C62.41 placement: A and B
Applications: surge in the level of activity to lower areas, sensitive / important electrical loads including the allocation of cabinet, counter and important user load distribution centers
Warranty: 20 years
Product ID: UL1449 2nd edition, cUL, UL1283
Quality manufacturers: ISO9001: 1994 quality management certificate BSI FM 30833

Mechanical performance parameters
Shell: spray-painted steel structure, all-weather; protection rating NEMA 4 (IP66)
Fixed: built-wear and multi-point lead pipe fixed angle
Connect: # 10 AWG (6 mm2) multi-strand wire
Weight: PTX: about 3 kilograms (7 pounds), PTE: about 5.5 kg (12 lbs)
Operating temperature:-400C - 650C

Electrical performance parameters
Protected Mode: All mode (three-phase Y-10 model): LN, LL (differential mode), LG, NG (common mode)
The frequency of input power: PTX :47-420 Hz; PTE and-SD :47-64 Hz
Response time: PTX £ 1 nanosecond, PTE <1 nanosecond
Capacitance: PTE: for each mode of <10 μF
Diagnosis of instructions: instructions for each LED with normal lights. Remote alarm interface (C-type dry-type normally open normally closed contact)
Short-circuit current protection: 200 kAIC the 30 amps fuse R-class (the factory does not provide)
Maximum EMI / RFI attenuation-Mil-std-220

1 kHz 10 kHz 100 kHz 1 MHz 10MHz Maximum attenuation frequency
3 dB 20 dB 40 dB 23 dB 7 dB 40 dB  @115 kHz

Options
Dynamic Tracking Network (ATN ): PTE
The voice of alarm, surge counter and Phase Monitor (SMARTTM )::(- SD suffix)
NEMA Type 4X stainless steel enclosure: (-SS suffix) (prior notice to the factory, there are at least the number of requirements)
Built-in fuse: (-L suffix) (up-to-date drawings at Division I)
Built-melting filament switch: (-D suffix) (up-to-date drawings at Division I)
ARM-3 Remote Alarm Module
PTX080-3Y201
PTX080/PTE080  PTX080-3Y201
 
Summary of technical parameters
Pass the peak flow capacity: Each phase 80KA, each model 40KA
ANSI / IEEE C62.41 installation location: A, B and C
Applications: high-to low-surge level of activity areas, sensitive / important electrical loads including the allocation of cabinet, counter and important user load distribution centers
Warranty: 20 years
Product ID: UL1449 2nd edition, cUL, UL1283
Quality manufacturers: ISO9001: 1994 quality management certificate BSI FM 30833

Mechanical performance parameters
Shell: spray-painted steel structure, all-weather; protection rating NEMA 4 (IP66)
Fixed: built-wear and multi-point lead pipe fixed angle
Connect: # 10 AWG (6 mm2) multi-strand wire
Weight: about 3 kilograms (7 pounds)
Operating temperature:-400F (-400C) - +1850 F (+850 C)

Electrical performance parameters
Protected Mode: All mode, (three-phase Y-10 model) LN, LL (differential mode), LG, NG (common mode)
The frequency of input power: PTX :47-420 Hz; PTE and-SD :47-64 Hz
Response time: PTX £ 1 nanosecond, PTE <1 nanosecond
Capacitance: PTE: for each mode of <10 μF
Diagnostic instructions: LED instructions, each of the normal green, Remote Alarm Interface (C-type dry-type normally open normally closed contact)
Short-circuit current protection: 200 kAIC the 30 amps fuse R-class (the factory does not provide)

Maximum EMI / RFI attenuation-Mil-std-220

1 kHz 10 kHz 100 kHz 1 MHz 10MHz Maximum attenuation frequency 
3 dB 21 dB 40 dB 23 dB 8 dB 40 dB  @113 kHz

Options
Dynamic Tracking Network (ATN ): PTE
The voice of alarm, surge counter and Phase Monitor (SMARTTM )::(- SD suffix)
NEMA Type 4X stainless steel enclosure: (-SS suffix) (prior notice to the factory, there are at least the number of requirements)
Built-in fuse: (-L suffix) (up-to-date drawings at Division I)
Built-melting filament switch: (-D suffix) (up-to-date drawings at Division I)
ARM-3 Remote Alarm Module

 PTE080-3Y201

PTE080-3Y201 PTE080-3Y201-S/SD

 

ptx160-3y201
 
PTX160/PTE160  PTX160-3Y201

Summary of technical parameters
Pass the peak flow capacity: Each phase 160KA, each model 80KA
ANSI / IEEE C62.41 installation location: A, B and C
Applications: high-to low-surge level of activity areas, sensitive and important counters the load including the allocation of power, the user distribution and the main load center cabinet
Warranty: 20 years
Product ID: UL1449 2nd edition, cUL, UL1283
Quality manufacturers: ISO9001: 1994 quality management certificate BSI FM 30833

Mechanical performance parameters
Shell: spray-painted steel structure, all-weather; protection level NEMA4 (IP66)
Fixed: built-wear and multi-point lead pipe fixed angle
Connect: # 10 AWG (6 mm2) multi-strand wire
Weight: about 5.5 kg (12 lbs)
Operating temperature:-400F (-400C) - +1850 F (+850 C)

Electrical performance parameters
Protected Mode: All mode, (three-phase Y-10 model) LN, LL (differential mode), LG, NG (common mode)
The frequency of input power: PTX :47-420 Hz; PTE and-SD :47-64 Hz
Response time: PTX £ 1 nanosecond, PTE <1 nanosecond
Capacitance: PTE: for each mode of <10 μF
Diagnostic instructions: LED instructions, each of the normal green, Remote Alarm Interface (C-type dry-type normally open normally closed contact)
Short-circuit current protection: 200 kAIC the 30 amps fuse R-class (the factory does not provide)
Maximum EMI / RFI attenuation-Mil-std-220
1 kHz 10 kHz 100 kHz 1 MHz 10MHz Maximum attenuation frequency 
3 dB 21 dB 40 dB 21 dB 5 dB 40 dB  @98kHz

Options
Dynamic Tracking Network (ATN ): PTE
The voice of alarm, surge counter and Phase Monitor (SMARTTM )::(- SD suffix)
NEMA Type 4X stainless steel enclosure: (-SS suffix) (prior notice to the factory, there are at least the number of requirements)
Built-in fuse: (-L suffix) (up-to-date drawings at Division I)
Built-melting filament switch: (-D suffix) (up-to-date drawings at Division I)
ARM-3 Remote Alarm Module

 PTE160-3Y201

PTE160-3Y201 PTE160-3Y201-D/SD

PTX300-3Y201
PTX300/PTE300  PTX300-3Y201

Summary of technical parameters
Pass the peak flow capacity: Each phase 300KA, each model 150KA
ANSI / IEEE C62.41 installation location: B and C
Applications: high-surge level of activity zones, industrial applications, including large-capacity into line counters, high-capacity distribution of electrical cabinets and a single large load
Warranty: 20 years
Product ID: UL1449 2nd edition, cUL, UL1283
Quality manufacturers: ISO9001: 1994 quality management certificate BSI FM 30833

Mechanical performance parameters
Shell: spray-painted steel structure, all-weather; protection level NEMA4 (IP66)
Fixed: built-wear and multi-point lead pipe fixed angle
Connect: # 14-1/0 (2.5-50mm2) multi-strand wire
Weight: about 14 kilograms (30 pounds)
Operating temperature:-400F (-400C) - +1850 F (+850 C)

Electrical performance parameters
Protected Mode: All mode, (three-phase Y-10 model) LN, LL (differential mode), LG, NG (common mode)
The frequency of input power: PTX :47-420 Hz; PTE and-SD :47-64 Hz
Response time: PTX £ 1 nanosecond, PTE <1 nanosecond
Capacitance: PTE: for each mode of <10 μF
Diagnostic instructions: LED instructions, each of the normal green, Remote Alarm Interface (C-type dry-type normally open normally closed contact)
Short-circuit current protection: 200 kAIC the RK5 fuse 60 amps (the factory does not provide) the maximum EMI / RFI attenuation-Mil-std-220
1 kHz 10 kHz 100 kHz 1 MHz 10MHz Maximum attenuation frequency 
3 dB 21 dB 40 dB 22 dB 6 dB 40 dB  @ 108kHz

Options
Dynamic Tracking Network (ATN ): PTE
The voice of alarm, surge counter and Phase Monitor (SMARTTM )::(- SD suffix)
NEMA Type 4X stainless steel enclosure: (-SS suffix) (prior notice to the factory, there are at least the number of orders required)
Built-in fuse: (-L suffix) (up-to-date drawings at Division I)
Built-melting filament switch: (-D suffix) (up-to-date drawings at Division I)
ARM-3 Remote Alarm Module

PTE300-3Y201

 PTE300-3Y201-D/SD
PTX300-3Y201-D/SD
PTX400-3Y201
PTX400/PTE400  PTX400-3Y201
PTE400-3Y201
PTE400-3Y201
PTE400-3Y201-D/SD

Summary of technical parameters
Pass the peak flow capacity: Each phase 400KA, each model 200KA
ANSI / IEEE C62.41 installation location: B and C
Applications: high-surge level of activity zones, industrial applications, including large-capacity into line counters, high-capacity distribution of electrical cabinets and a single large load
Warranty: 20 years
Product ID: UL1449 2nd edition, cUL, UL1283
Quality manufacturers: ISO9001: 1994 quality management certificate BSI FM 30833

Mechanical performance parameters
Shell: spray-painted steel structure, all-weather; protection level NEMA4 (IP66)
Fixed: built-wear and multi-point lead pipe fixed angle
Connect: # 14-1/0 (2.5-50mm2) multi-strand wire
Weight: about 14.5 kilograms (32 pounds)
Operating temperature:-400F (-400C) - +1850 F (+850 C)
Electrical performance parameters
Protected Mode: All mode, (three-phase Y-10 model) LN, LL (differential mode), LG, NG (common mode)
The frequency of input power: PTX :47-420 Hz; PTE and-SD :47-64 Hz
Response time: PTX £ 1 nanosecond, PTE <1 nanosecond
Capacitance: PTE: for each mode of <10 μF
Diagnostic instructions: LED instructions, each of the normal green, Remote Alarm Interface (C-type dry-type normally open normally closed contact)
Short-circuit current protection: 200 kAIC the RK5 fuse 100 amps (the factory does not provide)
Maximum EMI / RFI attenuation-Mil-std-220
1 kHz 10 kHz 100 kHz 1 MHz 10MHz
Maximum attenuation frequency
3 dB 21 dB 40 dB 22 dB 6 dB 40 dB  @ 108kHz

Options
Dynamic Tracking Network (ATN ): PTE
The voice of alarm, surge counter and Phase Monitor (SMARTTM )::(- SD suffix)
NEMA Type 4X stainless steel enclosure: (-SS suffix) (prior notice to the factory, there are at least the number of requirements)
Built-in fuse: (-L suffix) (up-to-date drawings at Division I)
Built-melting filament switch: (-D suffix) (up-to-date drawings at Division I)
ARM-3 Remote Alarm Module
PTX640/PTE640-3Y201-SD
PTX640/PTE640
PTX640-3Y201/PTE640-3Y201
PTX640-3Y201-S/D
PTE640-3Y201-D/SD
 
 

Summary of technical parameters
Pass the peak flow capacity: Each phase 640KA, each model 320KA
ANSI / IEEE C62.41 installation location: B and C
Applications: high-surge level of activity zones, industrial applications, including large-capacity into line counters, high-capacity distribution of electrical cabinets and a single large load
Warranty: 20 years
Product ID: UL1449 2nd edition, cUL, UL1283
Quality manufacturers: ISO9001: 1994 quality management certificate BSI FM 30833

Mechanical performance parameters
Shell: spray-painted steel structure, all-weather; protection level NEMA4 (IP66)
Fixed: built-wear and multi-point lead pipe fixed angle
Connect: # 14-1/0 (2.5-50mm2) multi-strand wire
Weight: about 14.5 kilograms (32 pounds)
Operating temperature:-400F (-400C) - +1850 F (+850 C)
Electrical performance parameters
Protected Mode: All mode, LN, LL (differential mode), LG, NG (common mode)
The frequency of input power: PTX :47-420 Hz; PTE and all-SD :47-64 Hz
Response time: PTX £ 1 nanosecond, PTE <1 nanosecond
Capacitance: PTE: for each mode of <10 μF
Diagnostic instructions: LED instructions, each of the normal green, Remote Alarm Interface (C-type dry-type normally open normally closed contact)
Short-circuit current protection: 200 kAIC the RK5 fuse 100 amps (the factory does not provide)
Maximum EMI / RFI attenuation-Mil-std-220
1 kHz 10 kHz 100 kHz 1 MHz 10MHz Maximum attenuation frequency 
3 dB 21 dB 40 dB 22 dB 6 dB 40 dB  @ 108kHz

Options
Dynamic Tracking Network (ATN ): PTE
The voice of alarm, surge counter and Phase Monitor (SMARTTM )::(- SD suffix)
NEMA Type 4X stainless steel enclosure: (-SS suffix) (prior notice to the factory, there are at least the number of requirements)
Built-in fuse: (-L suffix) (up-to-date drawings at Division I)
Built-melting filament switch: (-D suffix) (up-to-date drawings at Division I)
ARM-3 Remote Alarm Module

◆ About   ◆Products  ◆service  ◆Consultation   ◆Contact

Products Navigation: Lightning SPD lightning arrester lightning rod lightning conductor transient protection ESE lightning conductor
Address: 19D, Hengyunhaoting
2Building,Fuhua 3Road,Shenzhen,PRC.Postcode: 518033
E-mail:sales@08lightning.com Tel:0755-88834928 88834938 Fax:0755-88834938 Mobile:18929315088 粤ICP备05124982号-6