◆ About ◆Products ◆service ◆Consultation ◆Contact
| Products Series |
|
◆Lightning Satellite early discharge lightning rod Apollo active lightning IF3 pre-discharge lightning rod INDELEC early discharge lightning rod INGESCO early discharge lightning rod ◆Surge Protective Device Germany OBO lightning protection devices Germany DEHN SPD British FURSE SPD U.S. PANAMAX Surge Protector U.S. Eaton Innovative Surge Protection Device ◆Grounding Products ETC earthing module Resistance Reducing Agent Electrolytic Ion Ground Pole ◆MTL Industrial Products mtl Surge Protector |
Electrolytic Ion Ground used by our foreign technology, self-development, production and implementation of services and technical support to a new type of ground material.
Electrolytic Ion Ground ion tube filled with high-carbon compound crystals, the appearance of the use of copper, two kinds of steel materials. To ensure the best possible performance and longer service life of electrical conductivity. Conductor internal filling material containing a special ion compounds, can fully absorb the moisture in the air. Through deliquescence role of ionizing effective activity released into the soil, and soil and moisture in the air with more to promote the release down the outside conductor resistance, and resistance to maintain long-term stability. Conductor within the compounds, with the passage of time and gradually extend the synthesis of transparent gelatinous state. We use the conductive properties of glial compounds so that the whole system to a long-term in the state of ion exchange in order to constitute an ideal ground electrode electrolytic ion.
Second, the transformation from traditional grounding process, the ions are characterized by very grounding
Third, the working principle
Electrolytic Ion Ground added to the ground electrode reversible filler release. This filler has a water-absorbent, water, characteristic of reversible. Water when it can absorb 100-500 times their own water, when the external environment when the dry water and can be fully owned by the release of water to the surrounding water balance, such a reversible reaction, the effective shell environment to ensure the effective humidity, to ensure the stability of the grounding resistance. Generated in this way the earth ions absorb moisture, you can role through the deliquescence will be effective plasma electrolytic activity released into the surrounding soil, so that as a very grounding ion generation device, so as to improve the soil around the ground to meet the requirements. Ground electrode through the external filler filler with its internal electrolytic ion interaction for the shell of the chemical treatment of soil to reduce soil resistivity shell, at the same time very grounded in the sustained-release between the earth and soil to form a transitional zone, ground electrode increases the equivalent cross-sectional area and soil contact area, eliminating the grounding and contact resistance between the soil and improved the way the electric field distribution, the infiltration of filler good performance, deep into the soil and chimney in to form roots network, to increase the size of the discharge.
4, the proliferation of the surrounding ion 5, the electrical conductivity of soil to expand the scope of
Fourth, product technical parameters
Fifth, the design method and the number of reference
The projection formula: n ≈ (0.0275 * ρ / R) -0.4
n order to support the required number of grounding electrodes
soil resistivity ρ
Maximum value for the grounding resistance R
If the soil is particularly high resistivity (1000 ohm. M), can be calculated by multiplying the above-mentioned adjustment factor k, can be value 1.2 ~ 1.5, a high soil resistivity, k values increased.
Sixth, the scope of application and how to use
Electrolytic Ion Ground very good because of its antiseptic properties, excellent electrical conductivity properties and a unique design process, are widely used in telecommunications, electric power, petrochemical, financial, network, electronics and other important places of the ground works, especially for poor soil conditions, construction limited conditions, the technical standards for the ground engineering requirements.
Construction method
1. Drilling:
Construction site in the selected diameter of 160mm × 3150mm/1550mm drilled vertical holes in the ground.
2. The preparation of filler:
Blending water into paste-like filler (slightly viscous fluid was like) into a good pre-drilled holes, the depth of some hole-bit;
3. Ground electrode implant:
(1) opened to great seal tape;
(2) holes in the ground electrode implantation, the top ground electrode flush with the ground plane;
(3) take good pinout;
(4) filler to fill in the rest of the surrounding earth to earth only when the top 100mm, measuring grounding resistance to ground requirements, covered with soil to fill around the electrode.
Note: When a ground electrode not to stop when requested, can be used in parallel use of two sets or more, stick with the stick should not be less than the interval between 5M; pinout use of multi-strand copper wire 50mm2, pinout and the ground electrode Press-fit body to implement, contact embalmed.
 |
 |
